Here's a video showing fully mitered skirts on Stickley fine upholstered furniture.
https://www.youtube.com/watch?v=A5Q-qBTQWOY
Does anyone do these mitered skirts on a regular basis?
Have you done them before? I'm thinking this might be a benefit when I am working with thick fabric.
gene
If I could find a tutorial, I might give it a try. But I can't wrap my head around how to do it on a skirt.
Looks like even if I did know how to do it, I would then have to make the overall length, width, and pattern -match come out right.
I could see myself doing it on plain thick fabrics.
That's impressive work.
I remember seeing a tutorial on how to do this sort of thing easily. There was one part missing in the tutorial but it seemed pretty easy to do. The missing part was figuring the measurement out. They do look very nice and would hang better. If someone figures it out I hope they share the wealth.
The way I was taught to make skirt, the face fabric is attached to the lining 2" from the edges and the skirt is folded at the seam between the fabric and the lining on the bottom edge. Same effect without having to mitre the corners.
I appreciate the feedback.
https://www.youtube.com/watch?v=0hqrsDdhkbA
Here's a video of a lady sewing blankets with mitered corners. She shows how to sew the back fabric to the face fabric and how to lay out and sew the mitered corners.
For furniture skirt panels I would only need to sew two mitered corners instead of all four.
I have not had the time to try this yet. I've been too busy. I will post my results when I do.
gene
Quote from: Darren Henry on February 10, 2017, 04:47:01 am
The way I was taught to make skirt, the face fabric is attached to the lining 2" from the edges and the skirt is folded at the seam between the fabric and the lining on the bottom edge. Same effect without having to mitre the corners.
Sounds like the way we do them also. It gives you basicly 4 layers of fabric on the corners as opposed to two payers done with a miter.
I made two skirts today using this mitered method. I really like it. I can see it becoming second nature if I use it enough. And I can see myself always using it now with thick fabrics.
gene
We will be trying this on our next skirt job. I have a shop full of chairs. At least 15 and I dont think any have skirts LOL.
Several years ago Keith, byhammerandhand, taught me how to use lacquer toners so I could touch up furniture feet. I have designers who often want to remove the skirts from furniture and it's nice to be able to make the existing feet look good rather than replacing the feet.
Making the mitered skirt is not too difficult. You are only mitering two corners instead of four. I played around with the overall dimensions a bit. 1 1/2" border looked nice.
gene
I delivered my first furniture (club chair and ottoman) that had the Stickley mitered skirts. And yes, I did not take pictures. I don't know why but I totally forgot.
The sewing has taken a bit of a learning curve, but they do seem easier to hang and they do look really nice.
I'm not sure if I will continue using this style for everything but it will definitely be helpful when working with thick fabric.
gene