Wegner

[SteveA]

Danish mid century - I have 5-6 of these to do. The back rests are all broken.  Previous repair co. put larger screws, and even drilled a hole through the side post for another screw none of which worked.  Take apart 3/4 of the fabiric fix the edge and put them back together - I have one done.  About two hours per chair. 

[SteveA]

After regluing the broken edges with epoxy - I screwed down a piece of pipe strap - very flat - w/#4 - 5/8th screw counter sunk.  The plate covers the area that is prone to blow out when they lean back.  It's the lower hole closer to the seat

[65Buick]

Yeah baby. Those are hot. Would love to get a job like that.

[SteveA]

Photobucket changed it's format - seems OK but there's a learning curve.  I had to splice in some hardwood the edge was bad  -



The finished backrest - good considering the fabric is 30 years old and been opened for repairs before

[65Buick]

PB won't load for me... but just repair, no reupholstery?

[MinUph]

Yea photobucket sucks wont load for me either.

[SteveA]

Last night when I went to PB - the software displayed a change and asked me to agree.  I did - a new interface which seemed an update so I went ahead and uploaded 3 photos.  The first choice I elected was to save it as a HL something but that didn't work.  Tried again choosing IMG and that worked.  I previewed the photos before posting and they appeared in the box as they should. 
This morning I logged into PB - those recent photos were there but the site is buffering non stop.  I'll keep playing around with the software but if someone else has a suggestion that would be great
SA

[MinUph]

Steve,
I don't post many photos here so I havent looked into the best or easiest ways to do so. But If I get some time over the weekend I will look into this more.