What I did last night

[Mike8560]

The key is a good marine product for teak and make a full. COver for the bost to cover from the sun

[fragged8]

even over here where our sun isn't so harsh keeping it covered
is the Key,

I used to use Deks Olje, it goes on like an oil for the first few coats
and after about 6 coats it builds up like varnish.

It looks like they have a 2 part system now.
http://www.marinemegastore.com/product.asp?pf_id=MAR_841GB&src=GBASE&gb_exvat=1


Looks really good when done but still lifts from teak in the sun, Teak has a
high oil content and tight grain so it's hard to get anything to stick.
I know my customer whos a wooden boat builder uses a 2 part epoxy
to varnish his wood with and that seems to last a long while.

Rich

[Mike8560]

When touncan let me know what he uses ok?

[Allan]

Mike

I use Sikkens on my boat and I find it works really well on the teak and i have a lot of it

Allan

[Mike8560]

This boat only has a little on it.    I like the look but Its alot is alot f work when there allot. 
The post

the bow

the helm