Hiya there
heres a coupla tips from a newbie
maybe you got some too:
when you thread the needle, pinch your fingers real close other side of needle and grab thread as it comes through
when you have to rotate the handwheel, it helps heaps if you depress the foot pedal a bit to unload the clutch
If I were you guys and gals I would take Needles tips. Any time him, Scotty or Allan offer tips, take them.
Aussies are known to NOT tip anyone. They despise tipping. :)
Chris
Heya mojo, stay cool old bean it's just a different culture down yonder here as ya know.
Whereas in the States some folk definitely have to rely on their tips to augment their wage.
Auctor pretiosa facit, "the giver adds value to the gift".
Anyway, what you got apart from hanging on to the threads when you start to sew? >:(
Wha doese pinching your fingsrs close do? I used to thread the neee like nothing
Old eye now I take forever. I have found hding a white caes behind The needle and Infront of the foot bar helps me see just the needle. Old eyes ;(
My brother in law whenever he comes here handles his own bags so he doesn't have to tip. :) He could not believe that our wait staff only makes $ 2.35 per hour. Once he realized that he started tipping better. :)
I tipped an exceptional waiter that I had in Sydney once and he about flipped. He as probably hoping I would come back the next day. :)
All cultures are different. I about had a fit when I found out I had to pay for each refill of coffee or soda. Same holds true in England. I had to pay for all my refills there. ....lol......
I maybe heading to the Manly area next summer to see my in laws. Cannot wait to get back to Aussie land. Great people and gorgeous scenery.
Chris
Dont drink and drive.
Quote from: Mojo on August 23, 2011, 10:54:42 am
All cultures are different. I about had a fit when I found out I had to pay for each refill of coffee or soda. Same holds true in England. I had to pay for all my refills there. ....lol.....
Chris
up
in new englewnd there was one place bonanza nit really a Buffett but you ot a tray and slad bar and you filled your own glass so you could get plenty of refills
I'm sure at I got my codderefreshed at a diner with breakfast.
But when I got here free refills. Awsome. I've got one waitress at dennys that when she sees me just bring 2 diets cokes to me right off. I remebr as a kid my dad sayi g don't drink it all before you dinner get to the table at resteraunts.
Tip: Don't eat yellow snow!
Quote from: Mojo on August 23, 2011, 09:07:09 am
If I were you guys and gals I would take Needles tips. Any time him, Scotty or Allan offer tips, take them.
Aussies are known to NOT tip anyone. They despise tipping. :)
Chris
Your right Chris, I do despise tipping. When in your land I tip well as I realize the system screws the worker in your land. I despise your system more than tipping , it sucks.
Yeah, it's funny because I spent a few months backpacking Europe, and until I figured it out everywhere I went I was getting these weird looks for tipping. Ha! What blew me away was in Rome, we went to get some gelato and the price to sit down inside and eat it opposed to getting it to go was double!
It does stick in my craw, that in addition to paying exorbitant prices for restaurant food, we also have to pay the help, too.
You realize that if you tipped your waiters the amount they EXPECT to be tipped, they would make more than you do? Don't get me wrong. If I needed a job tomorrow, I would be proud to wait tables. BUT, it ain't exactly rocket science.
Am I being conceited in thinking that a skilled tradesman should make more than a waiter?
I've never been to Australia but I've seen Papillon with Steve McQueen and Quigley Down Under with Tom Selleck so I know all about Australia.
Moils get a lot of tips.
gene
No absolutely not, I could not agree more. I mean a tip for exceptionally good service is one thing, but like you said an expected 15% gratuity to do a job they are already paid to do I think is ridiculous. If they have a problem with their pay rates I think it should be brought up with management, or their choice in career. What bugs me is that, tip or no tip, if it isn't what they feel we should tip then we are pricks. What if the food is bad? I wouldn't want to tip for bad food wether or not its the servers problem or not, truth be told. Right hand needs to talk to the left hand every once and again.
My wife was a waitress till not long ago,she was paid $25 an hour, a good waiter should get paid a good wage as in Australia it is a trade, you can do an apprenticeship and go to trade school. If the system was to be a fair one in america, then after tipping the waiter you would then proceed to pay the bill "however much you thought the meal was worth". Generally in restaurants in aus. if you give the waiter a tip in appreciation of a really enjoyable meal, it will be shared between all the staff from chef through to dishwasher. The whole tipping thing in the U.S. is demeaning , like they have to put on a performance for you and amuse you to get a good tip, it should be up to the owner to hire good staff and run the place well and if your not happy with the service you tell him and he does something about it.
Hey Needles, BOMBERS ARE IN THE FINALS WOOHOOO 8)
BOMBERS ARE IN THE FINALS YEEHA :-*
C'mon everybody loosen up and hand us out [for free] all of your hard earned upholstery tips being learnt over many diligent years of blood, sweat and tears!!
Hey anyway here's some slippery new needles seen on Ebay, not sure if they come in larger sizes 'though:
http://www.ebay.com.au/itm/NEW-Ceramic-Industrial-Embroidery-Sewing-Machine-Needle-/270804117889?pt=AU_Sewing&hash=item3f0d2ee981
Silcone, anybody?
Of all of those "handy" little tips that have came along on this board, one that comes to mind is the technique for tracing around a board (such as a dining room seat) to get the proper seam allowance.
I don't remember who posted it, but I like it:
Take a full metal "M" size bobbin, put an ink pen through the hole in the middle, and roll the bobbin around the board (while marking on the fabric).
For me, it produces a seam allowance that suits my style (it may not suit everyone).
Quote from: sofadoc on August 23, 2011, 09:01:59 pm
Of all of those "handy" little tips that have came along on this board, one that comes to mind is the technique for tracing around a board (such as a dining room seat) to get the proper seam allowance.
I don't remember who posted it, but I like it:
Take a full metal "M" size bobbin, put an ink pen through the hole in the middle, and roll the bobbin around the board (while marking on the fabric).
For me, it produces a seam allowance that suits my style (it may not suit everyone).
You use the same method for ottomans? Most ottomans we get in, the top that's on it is too tight or too loose.
Ottomans can be trickier, since so many have a crown. The bobbin trick mainly works for flat items.
You're right. Many ottoman covers don't fit right.
One very important tip given to me when starting up a business, given to me from a friend of me dad's who was a very successful business man. You are never going surfing or fishing, your out giving a quote.
I keep a few small pieces of scrim foam around for when I have to hand sew and the needle is not going through smoothly... hands always get sweaty and the foam side of the scrim foam gives pretty good grip.