Hey folks,
just a quick question about the oil pan on my machine( not really sure what its suppose to be called)
Mine is plastic and is all cracked so is the oil cup. any ideas on where I can find a new one? I oil my machine all the time its an old singer w155g . Hubby can make one out of aluminum if that will work but im not sure if thats a good idea or not. any ideas or suggestions would be great . thanks in advance for your help
Terry
if you oil your machine manually, the pan is of no use except to catch the drops.. lay a towel inside the pan to absorb the drops and keep sewing......I've heard the only way to find a pan is to buy a machine that has one......
In the past I purchased one for my 111W153 from Bob Kovar who advertises in the classified section of this board, he is well respected and I've included a copy of his Ad:
For Sale: New and used industrial sewing machines. Single and double needle. Adler, Brother, Juki, Pfaff, Singers and more. $399 and up. We stock parts, needles and thread. Bob Kovar toll free# 1-866-362-7397 Sewmun@aol.com (7/31/10)
I've been looking for an oil pan also for of our machines. We have one with the plastic tray also and it cracked a long time ago.
One of those things I think about and immediately forget about again.
I'll call Bob in the morning... If I can remember! :o
Jim
I had a cracked pan on my machine also so I got the local plumbing works to make me a galvanised one from sheet metal
Works a treat
Allan
my juki has a metal pan as standard,
Thanks for all the help guys n gals I think I will be able to make one out of some aluminum that I have laying around. It should work out just fine I will let you all know.
Ya I did t kn ow there was plastic my first singer had one I the. Bought a juki and a metal one was o. The table I e sence bought a used singer and table a d it is also metal were talking the drip Pa. That is tacked to the table user the machine right ?
By the way I'm going to remove the kastest singers motor and clutchand junk the table keepi g the motor clutch and head fir spares anyone need a table
What kind of condition is the table in Mike ? Does it come with the treadle ?
Chris
It's a normal machine table for a singer juki also fits it everything but the motor and clutch when I'm done The metal frame is goos but the wood well pressed board with a Formica top is. Warped sagging it would need s new one Need one?
I was thinking of maybe picking it up from you. I want a spare. I am going to be getting in touch with Bob to see if he has any used machines. I know he attends a lot of auctions so I may have him watch for a good compound feed machine for me. If so then I could use the table of yours.
I may be coming your way in a week or so. I can break it down and throw it in the basement of my coach.
Chris
What model Singer is that? W155G?
Not sure what that is. Is it a house hold model?
Let me known chris I've still got to take the motor off I had it in my trailer.
That gone and now I've got it in my garage and van outside.
Will do Mike.
Chris